Factory Service Operations & Pricelist

Please follow these instructions
1. Complete all requested information in CCR Liberty service request form and email it back to us. 2. Based on the information in the form you will be put on our waiting list.
3. As soon as we have a specific date for the service of your unit, we will contact you.
4. If you have any further questions, please email us at info@divesoft.com.

Download Service Request Form

Download

Following prices exclude VAT.

Head services

Head inspection + service – (Head only)

Service of the Liberty Head includes visual inspection of the head and a functionality test of the Handsets, Buddy display, and HUD. Also a complete test of all included sensors and the solenoids. Then the complete solenoid system is disassembled and cleaned. The solenoids will undergo a pressure test following reassembly. The connectors will all be cleaned and all the sealing parts will be replaced. The oxygen sensors will undergo a sensor condition test and the head will be leak tested. The Latest Firmware will be installed and a final system test completed.
195 EUR/ $ 238,10

2021 Edition upgrade

Details about the 2021 electronics upgrade can be found at: https://www.divesoft.com/en/products/ccr-liberty/2021edition Following the upgrade the electronics compartments are sealed, pressure tested to 350m, and a tamper resistant paint is applied to the screws. In addition to the electronics upgrade it is necessary to do an annual service of the head itself, the cost of this and details of what is included are listed above.

1790 EUR/ $ 2199

Oxygen inlet upgrade kit (parts & machining)

Installation of the Axial Oxygen Connection requires the head to be machined at the factory. This fee covers the machining and new components for the conversion. In addition an annual service of the head, outlined above, will be required.

533 EUR/ $ 650,80

Oxygen sensor replacement - 1pc

Every year we recommend replacing all oxygen sensors in your CCR Liberty.

90,80 EUR / $ 110,90

Batteries replacement

Every three (3) years we recommend replacing both battery packs. Like all lithum batteries they will diminish in capacity with age & use.

477,30 EUR/ $ 582,80

Loop components services

FMCL Loop without DSV/BOV (Loop Hoses, Counterlungs, MAV's, ADV, & OPV)

Service of the FMCL Loop, without the mouthpiece (DSV or BOV), includes manual cleaning of connecting and sealing parts, visual inspection of the condition of all parts including sewn parts, and replacement of all bayonet seals. The MAV's (OXY & DIL) & OPV will be completely disassembled, components will be cleaned, all internal seals will be replaced before being reassembled, and then each component will undergo a performance test underwater to check for leaks. The complete loop will then undergo a pressure and vacuum test.

124,90 EUR/ $ 152,60

BMCL Loop without DSV/BOV (Loop Hoses, Counterlungs, & OPV)

Service of the BMCL Loop, without the mouthpiece (DSV or BOV) or MAV's, includes manual cleaning of connecting and sealing parts, visual inspection of the condition of all parts including sewn parts, and replacement of all bayonet seals. The OPV will be completely disassembled, components will be cleaned, all internal seals will be replaced before being reassembled and adjusted, and then it will undergo a performance test underwater to check for leaks. The complete loop will then undergo a pressure and vacuum test.

52,80 EUR/ $ 64,50

SM Loop without DSV/BOV (Loop Hoses, Counterlungs, & OPV)

Service of the Sidemount Loop, without the mouthpiece (DSV) or MAV's, includes manual cleaning of connecting and sealing parts, visual inspection of the condition of all parts including sewn parts, and replacement of all bayonet seals. The OPV will be completely disassembled, components will be cleaned, all internal seals will be replaced before being reassembled and adjusted, and then it will undergo a performance test underwater to check for leaks. The complete loop will then undergo a pressure and vacuum test.

53,3 EUR/ $ 65

DSV + 2x Dräger directional valves

Service of the DSV includes visual inspection of condition, disassembly and cleaning of all parts, relubrication and reassembly of the DSV itself, and installation of new Drager directional valves. The complete assembly will then be pressure and vacuum tested underwater to check for leaks.

128,80 EUR/ $ 157,30

BOV + 2x Dräger directional valves

Service of the BOV includes visual inspection of condition, disassembly and cleaning of all parts including the Apeks second stage, relubrication and reassembly, and installation of new Drager directional valves. The complete assembly will then be pressure and vacuum tested underwater to check for leaks.

151,60 EUR/ $ 185,20

BOV with ADV + 2x Dräger directional valves

Service of the BOV+ADV includes visual inspection of condition, disassembly and cleaning of all parts including the Apeks second stage, relubrication and reassembly, and installation of new Drager directional valves. The complete assembly will then be pressure and vacuum tested underwater to check for leaks.

177,30 EUR/ $ 216,40

MAV – Oxyen & Diluent (not applicable to FMCL MAVs)

Service of the MAV's (excluding the FMCL MAV's) includes Visual inspection of all parts, disassembly and cleaning, replacement of all sealing parts, relubrication, assembly, and a pressurized test underwater to check for leaks.
78,70 EUR/ $ 96,10

Membrane ADV service

Service of the T-piece ADV includes Visual inspection of all parts, disassembly and cleaning, replacement of all sealing parts, relubrication, assembly, and a pressurized test underwater to check for leaks.
31,60 EUR/ $ 38,60

Corrugated (loop) hoses replacement (FMCL/BMCL)

Every five (5) years it is recommended that you replace all the corrugated breathing hoses on your Backmount unit. This is the expected cost of this service but it could vary by unit and configuration.

198,20 EUR/ $ 242

Corrugated (loop) hoses replacement (SM)

Every five (5) years it is recommended that you replace all the corrugated breathing hoses on your Sidemount unit. This is the expected cost of this service but it could vary by unit and configuration.
131 EUR/ $ 160

Other services

Apeks first stage regulators DST service DIL/OXY (1pcs)

Service of a pair of Apeks first stages by an Apeks certified technician utilizing genuine Apeks brand service parts, and using oxygen compatible lubricants. Also included are the replacement sealing components for all the attached hoses and the replacement of the OPV’s. The intermediate pressure will be set to 8.5bar/125psi and they will undergo a final pressurized leak test underwater.

151,60 EUR/ $ 185,10

Apeks first stage regulators Flight service DIL/OXY (1pcs)

Service of a pair of Apeks first stages by an Apeks certified technician utilizing genuine Apeks brand service parts, and using oxygen compatible lubricants. Also included are the replacement sealing components for all the attached hoses and the replacement of the OPV’s. The intermediate pressure will be set to 8.5bar/125psi and they will undergo a final pressurized leak test underwater.

159,70 EUR/ $ 195

BCD + unit's frame + canister with scrubber

Service of the BCD includes a pretest of inflation to check for function and leaks, then disassembly and replacement of the seals on the inflator mechanism, disassembly and internal cleaning of the bladder with disinfectant solution, cleaning and inspection of the OPV, reassembly, and final pressure testing of the complete assembly.

61,40 EUR/ $ 75

Cleaning + disinfection

Disinfection of any/all components that come into contact with breathing gas for a period of one hour and subsequent rinsing with clean water.

30,10 EUR/ $ 36,80

Intermediate pressure hoses and high pressure hoses replacement

Every five (5) years it is recommended that you replace all the high pressure and low pressure hoses. The cost of this will vary by unit and configuration.

45+ EUR/ $ 49+