Freedom computer

Firmware upgrade

View more

New Divesoft tool that can be used to upgrade the FW on your Liberty and Freedom, download your dive logs and more…

Freedom firmwares

17th November 2021, firmware 1.18.2

Download
  • User configurable date format, see "Setup / Miscellaneous / Date format"
  • CCR Diluent ppO2 added to "technical screen", top right, next to stack time.
  • Added "universal" water salinity according to EN13319 (Setup / Preferences / Salinity).
  • Selectable lower button function - cycle dive screens or display off (Setup / Preferences / User interface / Lower bttn.).
  • Optional no-tilt editor, using buttons only (Setup / Preferences / User interface / Navigation).
  • Lower button long press in menu will step one line up (backwards).
  • Fixed unwanted behavior with all OC mixtures disabled.
  • Fixed technical screen refresh in surface mode.
  • Fixed misleading display of "Deco stop", instead of "Gas switch".
  • Fixed "End pressure" rounding error when using imperial system.
  • Fixed dive log profile display below 327.68m.

20th May 2021, firmware 1.17.7

Download
  • Fixed TTS glitch, which displayed BO TTS immediately after switching mixtures. After a few seconds TTS went back to normal GF.

26th June 2020, firmware 1.17.5

Download
  • Fixed USB drive error with too much short dives

17th June 2020, firmware 1.17.4

Download
  • Fixed No-Fly time.
  • Option to calculate TTS and ascent with current SP instead of high SP (Setup / Rebreather / Const CCR Setup / SP Ascent (High, Current))
  • Improved battery percentage calculation.
  • Fixed ceiling glitch near surface
  • Fixed USB connection mode, for Freedoms with 300+ dive logs.
  • Fixed CNS calculation in aSCR mode, which used OC mix ppO2 instead of current aSCR ppO2.

20th November 2019, firmware 1.17.2

Download
  • Decompression algorithm update
  • Optional Gauge screen now available in any dive mode
  • Safety stop timer added to Synoptic screen

12th March 2019, firmware 1.16.1

Download
  • Lost gas handling
  • High ppO2 limit is split to bottom and deco settings
  • new application Inclinometer
  • owner information and many more, see Release notes

29th October 2018, firmware 1.15.4

Download
  • new display controller support

11th July 2018, firmware 1.15.3

Download
  • stopwatch available in any dive mode
  • external temperature indication and low temperature warning in Analyzer app (below 5°C/41°F)
  • fixed incorrect battery charge level

and many more, see Release notes

12th April 2017, firmware 1.14

Download
  • Gas consumption in planner
  • SP automatic change improved
  • Current line in menu highlighted and

and many more, see Release notes

29th October 2015, firmware 1.13.5 (updated 1 Jul 2016)

Download
  • Nitrox analyzer
  • Repeated pO2 alarm (every 0.2bar above limit)
  • Charger mode in off state (since 1.12)
  • Redesigned Gauge mode with O2 sensor reading (Closed Circuit licenses only)

and many more...

8th June 2015, firmware 1.11 (updated 19 Oct 2015)

Download
  • Settable pO2 margins
  • Stack time timer (CCR modes)
  • Instant brightness change

and many more...

10th March 2015, firmware 1.10

Download
  • Works with MAC and Linux
  • Multiple diluents in CCR mode
  • SCR deco

7th October 2014, firmware 1.9

Download
  • Ceiling graph
  • Vertical speed indication
  • Average depth indication

29th July 2014, firmware 1.8 (updated 20 Aug 2014)

Download
  • Changed blue color shade for better readability (TFT display only)
  • Corrected bottom gas in planner
  • Stop miss alarm disabled in Follow ceiling mode
  • Fixed GF bug in planner

23rd June 2014, firmware 1.7

Download
  • bailout GF settings
  • default gas mix setting
  • faster graphics

2nd June 2014, firmware 1.6 (TFT units only)

Download
  • initial release for TFT units
  • low ppO2 alarm
  • improved handling with bad ppO2 sensor (CCR mode)

20th January 2014, firmware 1.5

Download
  • CCR mode (both measured pO2 and preset SP)
  • up to 3 oxygen sensors
  • plan computation can use gas switching
  • flight mode

11th October 2013, firmware 1.4

Download
  • several errors corrected
  • accelerometer starts reliably
  • option: dive plan in reverse order
  • average depth in current dive graph

2nd May 2013, firmware 1.3

Download
  • several errors corrected
  • current plan available underwater

26th April 2013, firmware 1.2

Download
  • corrected occasional hang and restart

12th April 2013, firmware 1.1

Download
  • initial release